Rohde Schwarz SMB100A 100kHz - 20GHz Signal Generator w/ B120 & HZ-15,16 Probes!

Description

Seller refurbished
Powered by
Frooition
Shop Categories
Amplifiers
Analyzers
Cable & Antenna Analyzers
Cables
Calibration Kits
Calibrators
Counters / Timers
Detectors
Emulators
Error Detectors
Logic Analyzers
Meters
Modules / Plug Ins
Multimeters
Network Analyzers
Noise Generators
Noise Sources
Optical
Optical Spectrum Analyzers
Oscilloscopes
Other
Pattern Generators
Power Meters
Power Sensors
Power Supplies
Probes
RF / Microwave
Service Monitors / Test Sets
Signal Analyzers
Signal Generators
Spectrum Analyzers
Thermal Imagers
VXI
We buy, sell and rent general purpose, optical and RF test and measurement equipment. We pay top dollar for your unwanted, surplus or defective gear. Let us make you an offer on your new or used Agilent, Tektronix, Anritsu, Fluke, Rohde & Schwarz and IFR instruments.
Rohde Schwarz SMB100A 100 kHz - 20 GHz Signal Generator w/ HZ-15 & HZ-16 Accy's
Item Description
Rohde & Schwarz SMB100A 100 kHz - 20 GHz Signal Generator w/ Probe Set & Amplifier - CALIBRATED!
You are bidding on a Rohde Schwarz SMB100A 100 kHz - 20 GHz Signal Generator with Option B120 (RF Path 100 kHz to 20 GHz, with mechanical step attenuator) Installed.  The HZ-15 Probe Set & HZ-16 Amplifier shown are also included, and have a list price of 5K combined.  It will arrive with a fresh calibration with certificate performed by an ISO 17025 accredited lab!  THIS UNIT IS IN PRISTINE CONDITION WITH LESS THAN 100 OPERATIONAL HOURS LOGGED ON THIS UNIT!
When you are in the market for a signal source, high signal quality, wide flexibility, and low operating costs are also primary considerations in the mid-range class. Rohde & Schwarz has developed the R&S® SMB100A to meet specifically these requirements: With its low SSB phase noise of typ. -128 dBc and its worldwide unique output level of >+18 dBm across a wide frequency range (1 MHz to 6 GHz), the new signal generator is setting standards. The fact that users can perform maintenance on the instrument themselves also increases availability and reduces operating costs. The instrument's low weight (5.3 kg), compact design, and favorable price/performance ratio complement the concept.
As an RF source with a frequency range of 100 kHz to 20 GHz, the R&S SMB100A covers all important frequency bands for RF applications. The conventional analog AM/FM and PhiM modulation modes as well as frequency sweep, level sweep, and LF sweep are also available as standard. In production, the R&S SMB100A excels with high level accuracy and level repeatability. Its short switchover times for frequency and level (remote control: typ. 1.6 ms for frequency and 1.2 ms for level, List mode: typ. <1 ms) help ensure optimized throughput.
Thus, the R&S SMB100A can be used in the production and servicing of broadcasting, EMC, and automotive products as well as for semiconductor development tests and aerospace & defense applications. Here, the pulse modulator (typ. 90 dB on/off ratio), which is available as an option, and the flexible pulse generator with a minimum pulse width of 20 ns are of special benefit. Additional properties that make the instrument ideal for these applications are its robust design and the fact that it can be used at altitudes up to 4600 m and within a temperature range of 0°C to 55°C.
To make servicing as easy and cost-effective as possible, the R&S SMB100A enables users to perform maintenance on their own. When service becomes necessary, an integrated self-test can be used during troubleshooting. Since replacement modules are pre-calibrated, a simple function check is sufficient to ensure the excellent technical data of the signal generator. With the help of the R&S NRP-Z92 power sensor, users can also optimize the level accuracy of the RF signal by means of automatic adjustment.
Features:
Frequency ranges: 9 kHz to 1.1, 2.2, 3.2 & 6 GHz, and 100 kHz to 40 GHz
RF output level of >+18 dBm from 1 MHz to 6 GHz (+25 dBm over range)
Fast: < 1 ms frequency and level setting times in "list mode"
SSB phase noise: typ -128 dBc/Hz (1 GHz/20 kHz offset)
Accurate: < 0.5 dB total uncertainty up to 3 GHz, (<0.9dB up to 6 GHz)
No wear: Solid state RF attenuator up to 6 GHz, reverse voltage protection
Flexible concept allowing for on-site service with no calibration required
Cal cycle of 3 years
Compact: < 12 lbs and only 2 rack-units high
Remote control via GPIB, LAN & USB
USB connectors for USB devices (keyboard, mouse, memory stick, etc.)
Connector for NRP power sensors for accurate power measurements
GPIB bus commands according to SCPI
R&S SML GPIB command set compatible
Operation via remote operation from any web-browser
This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes w/ a 14 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.
Insurance is included in UPS shipping charges.
Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.
We will accept payment for this item by company check, cashier’s check and wire transfer only.
If you have zero feedback, contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction.
Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed.
Please note that shipping and insurance costs are non-refundable.
Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction.
Make sure that you check out
our other auctions
for more great deals on test and measurement equipment.
Thank you and good luck bidding.
Need your unit calibrated by an ISO 17025 accredited lab prior to shipment? Not a problem. We work with numerous calibration and repair companies that can provide your required service at competitive prices.
About Us
About Us
Payment
Shipping
Terms
Returns
About Us
Spaulding Surplus, LLC was established in 2002 and we pride ourselves on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around. Our equipment is sourced from a variety of manufacturers including Agilent/HP, Fluke, Tektronix, Rohde & Schwarz, LeCroy, Anritsu, Advantest, Aeroflex/IFR, ILX Lightwave, JDSU, Wavetek, etc. We are also dedicated to providing fair and competitive bids for your unused test equipment and excess inventory. WHY PAY MORE FOR THE SAME EQUIPMENT?
Payment
Payment
We accept payment by company check, bank transfer and Paypal (for items valued below 00 USD). Payment must be received within 5 days of close of auction. Our mailing address is below and our bank info can be forwarded upon request. Spaulding Surplus 12829 Landale Street Studio City, CA 91604.
Shipping
Shipping
All instruments are professionally packed and shipped via UPS GROUND with full insurance. We typically ship within the continental US only (please no PO Boxes) unless other arrangements have been made with the buyer. International customers may provide their UPS, DHL or FedEx account for international shipments. Items will be shipped within 7 business days of payment.
Terms
Terms
All items sold on Ebay come with a standard 30 day right of return warranty from the date of receipt, unless otherwise specified in the auction details. Payment in full is required prior to shipment. Buyers are required to notify us immediately if an instrument arrives damaged, and must keep all boxes and packing materials in case a UPS damage inspection is necessary. An extended warranty of 30 days is available for all direct purchases from Spaulding Surplus, LLC and established customers purchasing directly may qualify for net 30 payment terms with PO required prior to shipment.
Returns
Returns
Spaulding Surplus typically offers a 30 day right of return for equipment received damaged or non-functional.  However, Spaulding Surplus, LLC shall not be held liable for any damages resulting from buyer/operator negligence, or the improper use of its equipment, nor does it warrant their suitability for any specific application or project.  The verification of product capability is the sole responsibility of the buyer.  PO's and purchases cancelled due to insufficient instrument capability, buyer's remorse or loss of order are always subject to a minimum 20% restocking fee.  A complete evaluation is required for any instrument returned under warranty, and refunds are not issued until said evaluation has been completed by an ISO 17025 accredited calibration lab.
Helpful Links
Add to Favorite Sellers
Sign up to Newsletter
View Feedback
Contact Seller
Visit seller's eBay Shop
About Seller Page
Spaulding Surplus, LLC prides itself on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around.
More Items!
View more great items
Powered by
Frooition
Frooition Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js)
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.