RF Signal Generator 25MHz-3GHz Hopping Ramp Pulse For AT Command SG3000 Pro-AT

Description

Description
RF Signal Generator 25MHz-3GHz Frequency Sweep Hopping Ramp Pulse For AT Command SG3000 Pro-AT
Version Introduction:
The version with AT suffix means that your instrument can remotely control the signal generator and grab spectrum data through the USB port of your PC (USB to TTL serial port module needed). The internal output of the device is a TTL level serial port (refer to AT manual, baud rate can be set).
Description:
SG3000 Pro-AT portable radio frequency signal source, signal frequency range 25MHz ~ 3GHz, power dynamic range -41.5dBm to 15dBm (reference value).
This RF signal source has adjustable frequency and power. It can be used for RF amplifier, switch, filter, interference and other tests, as well as for wireless communication and RF circuit research and development.
Main Functions:
- Single frequency point output: signal frequency, 25MHz ~ 3GHz; signal power, -41.5dBm ~ 15dBm (reference value); (signal frequency and signal power adjustable)
- Frequency sweep output: 100ms / 1s / 10s interval, start frequency, stop frequency, step frequency, transmit power adjustable
- Frequency hopping output: 100ms / 1s / 10s interval, adjustable start frequency, stop frequency, and transmit power
- Ramp output: 100ms / 1s / 10s interval, adjustable start frequency, start power, end power
- Pulse output: pulse time (minimum time is 2000us), adjustable start frequency, pulse width and transmit power (minimum duration of frequency is 20us)
- Frequency sweep output: 100ms / 1s / 10s interval, adjustable start frequency, stop frequency, step frequency and transmit power
Recommended Applications:
This RF signal source has adjustable frequency and power. It can be used for RF amplifier, RF gain module, RF switch, RF filter, mixer, attenuator, duplexer, line attenuation, antenna measurement and other tests, and can also be used for wireless communication and RF circuit research and development.
Technical Parameters:
Frequency:
- Frequency range: 25MHz to 3GHz
- Frequency resolution: ≥ 3Hz (reference value)
Power:
- Power range: -41.5dBm ~ 15dBm (reference value)
- Power resolution: ≥ 1dBm (reference value)
Frequency Sweep:
- Scanning method: step scan (equal interval frequency step)
- Scanning mode: continuous
- Scanning range: within the frequency range of the instrument
- Step change: linear
- Frequency step: 1kHz (minimum)
- Dwell time: 100ms, 1s, 10s
Display:
- Type: TFT LCD
- Resolution: 800 × 480
- Size: 5 inches
- Charging time: 4-5 hours
Surroundings:
- Working temperature: -20 ~ 45℃
- Storage temperature: -20 ~ 70℃
- RF interface: SMA-K
- Built-in RTC clock: support
Interfaces:
- RF interface: SMA-K
- Charging interface: Micro USB interface
2.4G Omnidirectional Antenna:
- Frequency range .: 2.4 ~ 2.5 GHz
- Standing wave ratio .: <= 1.5
- Gain: 6 dBi
- Characteristic impedance: 50 ohm
- Interface: SMA-J
Package Included:
- 1 x RF Frequency Generator
- 1 x 2.4G Omnidirectional Antenna
- 1 x 5V 2A Power Adapter
- 1 x User Manual
- 1 x Micro USB Charging Cable
Optional Parts:
- Communication Interface: TTL serial port (Micro USB interface)
- Communication interface converter: USB to TTL serial converter
Note: If optional parts are needed, please contact us to pay extra money. Thank you!
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
On Jul-08-21 at 01:16:12 PDT, seller added the following information: