-40%

JUNTEK™ JDS6600 DDS Signal Source Dual Channel Arbitrary Wave Function Generator

$ 53.85

Availability: 100 in stock
  • Return shipping will be paid by: Buyer
  • Type: Does not apply
  • All returns accepted: Returns Accepted
  • Condition: New
  • Brand: Does not apply
  • MPN: Does not apply
  • Item must be returned within: 30 Days
  • Refund will be given as: Money Back

    Description

    JDS6600 series DDS signal generator can generate sine wave, square wave, triangle wave, pulse wave, and arbitrary wave etc. The frequency will be up to 40MHz. And it has duty-cycle correction, amplitude modulation function and frequency sweep function, etc. It can show output signal, amplitude and frequency in the same time. This series has amplitude frequency characteristics, and the appearance is very delicate and beautiful. It can be applied in factories, schools, research institutes and laboratories. There are 5 models, JDS6600-60M, JDS6600-50M, JDS6600-40M, JDS6600-30M and JDS6600-15M. The main difference is the max output frequency of sin wave.
    Manual is
    here
    !
    Protocol:
    Click here!
    Frequency
    Characteristics
    JDS6600-15M
    JDS6600-30M
    JDS6600-40M
    JDS6600-50M
    JDS6600-60M
    Sine frequency range
    0~15MHz
    0~30MHz
    0~40MHz
    0~50MHz
    0~60MHz
    Square frequency range
    0~15MHz
    0~15MHz
    0~15MHz
    0~15MHz
    0~15MHz
    Triangle frequency range
    Pulse frequency range
    0~6MHz
    0~6MHz
    0~6MHz
    0~6MHz
    0~6MHz
    CMOS/TTL digital frequency range
    Arbitrary wave frequency range
    Square rise time
    ≤30nS
    ≤25nS
    ≤20nS
    ≤20nS
    ≤20nS
    Mininum Frequency resolution
    0.01µHz(0.00000001Hz)
    Frequency accuracy
    ±20ppm
    Frequency stability
    ±1ppm/3h
    Waveform
    Characteristics
    Waveform
    Sine, Square, Triangle, Pulse (duty-cycle correction),Partia Sine, CMOS, DC level, Half-wave, Full-Wave, Pos-Ladder, Neg-Ladder, Noise, Exponential Rise, Exponential Fall, Tone, Sinc Pulse, Lorentz Pulse, and 60 kinds user defined waveform.
    Waveform length
    2048 points
    Waveform sampling rate
    JDS6600-15M
    JDS6600-30M
    JDS6600-40M
    JDS6600-50M
    JDS6600-60M
    200MSa/s
    266MSa/s
    Waveform vertical resolution
    12 bits
    Sine
    Harmonic suppression
    ≥45dBc(<1MHz); ≥40dBc(1MHz~20MHz)
    Total harmonic distortion
    <0.8%(20Hz~20kHz,0dBm)
    Square and Pulse
    Overshoot (Square)
    ≤5%
    Duty-cycle range(Pulse)
    0.1%~99.9%
    Ramp wave
    Linearity
    ≥98%(0.01Hz~10kHz)
    Output Characteristics
    Amplitude range
    JDS6600-15M
    JDS6600-30M
    JDS6600-40M
    JDS6600-50M
    JDS6600-60M
    ≤10MHz:2mVpp~20Vpp
    ≤15MHZ:2mVpp~10Vpp
    ≤10MHz:2mVpp~20Vpp
    ≤30MHZ:2mVpp~10Vpp
    ≤10MHz:2mVpp~20Vpp
    ≤30MHZ:2mVpp~10Vpp                                           ≤60MHZ:2mVpp~5Vpp
    Amplitude resolution
    1mV
    Amplitude stability
    ±0.5%/5 h
    Amplitude flatness
    ±5%(<10MHz); ±10%(>10MHz)
    Waveform Output
    Output impedance
    50Ω±10%(typical)
    Protection
    All the signal output termianl can be shorted within 60s
    DC Offset
    Offset adjusting range
    Output Amplitude >2V
    0.2V
    0
    -9.99V~9.99V
    -2.5V~2.5V
    -0.25V~0.25V
    Offset resolution
    0.01 V
    Phase characteristics
    Phase adjusting range
    0~359.9°
    Phase resolution
    0.1°
    TTL/COMS Output
    Low level
    <0.3V
    High level
    1V~10V
    Level rise/fall time
    ≤20ns
    External Measurement Function
    Frequency meter function
    Frequency measurement range
    1Hz~100MHz
    Measurement accuracy
    Gate time continuously adjusted between0.01s~10s
    Counter function
    Counting region
    0-4294967295
    Coupled mode
    2kinds Coupling modes, DC and AC
    Control mode
    Manual operation
    Input signal voltage range
    2Vpp~20Vpp
    Pulse width measurement
    0.01us (resolution),  20s (MAX measuring time)
    Period measurement
    0.01us (resolution),  20s (MAX measuring time)
    Sweep Function
    Sweep channel
    CH1 or CH2
    Sweep type
    linear sweep, log sweep
    Sweep time
    0.1s~999.9s
    Setting range
    User settings
    Sweep direction
    Forward, Backward and Roundtrip
    Burst function
    Number of pulses
    1-1048575
    Burst mode
    Manual Trig, CH2 Trig, Ext.Tring(AC), Ext.Tring(DC)
    Technical parameters
    Display
    Display type
    2.4 inch TFT color LCD
    Storage and loading
    Quantity
    100 groups
    Location
    00 to 99(Power on will load the position 00)
    Arbitrary wave
    quantity
    1 to 60, totally 60 groups(default set 15 groups)
    Interface
    Interface mode
    USB to serial interface
    Extension interface -
    There is serial interface of TTL level mode to be
    convenient for user development.
    Communication speed
    115200bps
    communication protocol
    Open protocol
    Power supply
    Voltage range
    DC5V±0.5V
    Manufacturing process
    Surface-mount technology, FPGA design, high reliability, long service life
    Buzzer
    User can set ON or OFF by procedure
    Operating characteristics
    Full button operation, knob continuous adjustment
    Environmental conditions
    Temperature: 0~40
    o
    CHumidity:<80%
    Package included:
    1 x JDS6600 DDS Signal Source Dual Channel Arbitrary Wave Function Generator