Function Signal Arbitrary Waveform Generator 25MHz 2CH 160MSa/s 3.5"TFTLCD USB

Description

Note: we'll ship this item via
express mail service or SpeedPAK
to USA, Canada, Australia, New Zealand, Ireland, Austria, Belgium, Denmark, Germany, France, Finland, Luxemburg, Malta, Norway, Sweden, Swiss, Spain, Italy, UK, Japan, Korea,Thailand, Malaysia, Indonesia, Philippine, Singapore.
Clients from other countries pls contact with us in advance to confirm the different shipping charges before you order.
ET3325
Note: can work with  AC220V power supply, AC110V version need to pay extra money.
ET33 series two-channel function/arbitrary waveform generator is equipped with direct digital synthesis (DDS) technology
which enables output signal to be stable and accurate.
Instrument output channel sets CH1 channel output and CH2 channel output.
CH1 channel is major output channel for output of all the following functions;
CH2 channel is an auxiliary channel for output of basic waveform and arbitrary wave.
Key Features:
l
3.5-inch 480x320 TFT LCD
with clear graphic interface
l
Chinese / English menu available
l
Press key for help and information
l
File management supporting USB flash disk and local storage
l
Two-channel output with the highest output frequency of 10MHz (ET3310), 25MHz (ET3325), 40MHz (ET3340)
l
Sampling rate: 160MSa/S, vertical resolution: 12 bit and storage depth: 16k
l
5 basic waveforms and 32 arbitrary waveforms in-built
l
Pulse
wave output set in edge time
l
Internal/external AM, FM and FSK modulation function
l
Output of linear/logarithmic frequency sweep and burst waveform
l
Frequency meter of high precision of 160MHz
l
With
RS232 interface, USB Device,
USB Host interface supporting USB flash disk storage
l
Multi-functional arbitrary waveform editing software equipped
Frequency Characteristics
ET3325
ET3340
Waveform types
Sine, square, triangle, pulse, noise and arbitrary waves (including DC)
Sine
1uHz - 25MHz
1uHz - 40MHz
Square
1uHz - 5MHz
1uHz - 10MHz
Triangle
1uHz - 500kHz
1uHz - 1MHz
Noise (-3dB)
7MHz Bandwidth
7MHz Bandwidth
Pulse
100uHz - 5MHz
100uHz - 10MHz
Arbitrary wave
1uHz - 5MHz
1uHz - 10MHz
Frequency Resolution
1uHz
Frequency Accuracy
±5ppm
Sine Wave Characteristics
Harmonic distortion
>1Vpp
0-1MHz: <-45dBc
1MHz-10MHz: <-40dBc
10MHz-20MHz: <-30dBc
20MHz-40MHz: <-25dBc
0-1MHz:     <-45dBc
1MHz-40MHz: <-40dBc
Total harmonic distortion
<0.2% (20Hz-20kHz, 1Vpp)
Square Wave Signal Characteristics
Rise/fall
<20ns
Time
Overshoot
<5%
Duty cycle
=<100kHz: 1%-99%
；
=<5MHz: 20%-80%
；
=<10MHz: 40%-60% (0.1% resolution)
Dissymmetry
(50% duty cycle)
1% Period + 5ns
Jitter
6ns +0.1% Period
Ramp Wave Characteristics
Linearity degree
=<0.1% Peak output
Symmetry
0.0-100.0% (resolution 0.1%)
Pulse Wave Characteristics
Pulse width
Min 20ns
；
1ns resolution
Edge transition
time
Min 20ns
Overshoot
<5%
Jitter
6ns +0.1% Period
Arbitrary Wave Characteristics
Channel
CH1
CH2
Sampling speed
160MSa/S
160MSa/S
Waveform amplitude
resolution
12bits
10bits
Waveform length
16k
4k
Minimum rise/fall time
<20ns
<20ns
Jitter
6ns+30ppm
6ns+30ppm
Storage quantity
10 waveforms
10 waveforms
Output Characteristics
Amplitude (50Ω)
Range
1mVpp-10Vpp  =<20MHz
1mVpp-5Vpp     >20MHz
1mVpp-3Vpp     =<20MHz
Accuracy
±1% set value ±1mVpp(1kHz Sine, 0 offset, >10mVpp)
Resolution
1mV or 3 bit
Flatness
(relative to 1K Sine, 1 Vpp)
±0.1dB, =<100kHz
±0.1dB, =<100kHz
±0.3dB, =<5MHz
±0.2dB, =<5MHz
±0.4dB, =<25MHz
±2dB, =<40MHz
Offset (50Ω)
Range
±5Vpk ,
ac + dc
±1.5Vpk ,
ac + dc
Accuracy
±(1% set value +5mV+0.5% amplitude)
Output impedance
50Ω
Protection
Short circuit protection, automatically disables the waveform output when overloading
SYNC Output
Level
TTL compatibility
Impedance
50Ω
Rise/fall time
<25ns
；
Maximum frequency
25MHz
AM Modulation (CH1)
Carrier wave
Sine, square, ramp, pulse and arbitrary waveforms (excluding DC)
Source
Internal/external
Modulation wave
Sine, square, triangle and ramp
Modulation frequency
2mHz-20kHz
Modulation depth
0%-120%
FM Modulation (CH1)
Carrier wave
Sine, square, ramp, pulse and arbitrary waveforms (excluding DC)
Source
Internal/external
Modulation wave
Sine, square, triangle and ramp
Modulation frequency
2mHz-20kHz
Frequency offset
0-Maximum carrier frequency
FSK Modulation (CH1)
Carrier wave
Sine, square, ramp, pulse or arbitrary waveforms (excluding DC)
Source
Internal/external
Modulation wave
Square wave of 50% duty ratio
Keying frequency
2mHz-1MHz
Frequency Sweep (CH1)
Carrier wave
Sine, square, ramp, pulse and arbitrary waveforms (excluding DC)
Types
Linearity/Logarithm
Start/Stop Frequency
1uHz-Maximum carrier frequency
Sweep frequency time
1ms-500s
Trigger source
Manual operating, internal, external
Burst characteristics (CH1)
Carrier wave
Sine, square, ramp, pulse, noise and arbitrary waveforms (excluding DC)
Pulse count
1-65535 or infinite, gated
Start/stop phase
0-360°
Internal period
1us-500s
Gating source
External
Trigger source
Internal, external, manual operating
Frequency Meter
Frequency range
1Hz-160MHz
Frequency resolution
6 bit/s
Voltage range
and sensitivity
100mVpp-5Vpp
Input adjustment
input impedance
1MΩ
coupled modes
AC
Trigger Input
Level
TTL compatibility
Slope
Rise/Fall
Pulse width
>100ns
Reaction time
<500ns(burst)
<10us(sweep frequency)
Modulation Input
Impedance
1MΩ
Signal range
±5V ac + dc
General:
Power Supply
Supply voltage
AC 110-240V, 45-65Hz
Power consumption
< 40W
Display
Types
3.5-inch TFT LCD screen
Resolution
480x320
Color
16M color
Environment:
Temperature range
Operation: 10C - +40C
Non-operation: -10C - +60C
Cooling methods
Natural cooling
Humidity range
Below +35C: =<90% relative humidity
+35C - +40C: =<60% relative humidity
Interface
RS232,USB Host, USB Device
Standard accessories:
power cord (US, UK, Euro or AU plug is available), BNC probe x1pcs, CD.
Optional accessories:
BNC clip, RS232 cable, USB cable.