Eico 324 Signal Generator Capacitor/BNC Only Upgrade Kit

Description

This kit includes replacements for the 400V C8, C9, C10, C11, and C13 capacitors. These will be replaced with modern equivalent capacitors rated at 630V. C1 and C2 are replaced with safety capacitors.
******THIS KIT ONLY INCLUDES THE CAPS, BNC, AND SPAGHETTI TUBING AS
SHOWN IN THE PICTURE. PLEASE REVIEW MY AUCTIONS FOR OTHER EICO 324 KITS THAT I OFFER******
J1, the Amphenol connector is replaced with a standard BNC panel mount connector. This will allow you to use widely available BNC style test leads.
The BNC connector easily fits into the hole that was occupied by the Amphenol connector.  Simply unsolder the lead going to the RF Coarse switch, remove the Amphenol connector, install the new BNC connector in the existing hole, and solder the wire to the RF coarse switch. I’ve already soldered a wire to the BNC connector to make this upgrade as easy as possible.
Also included is one foot of braided spaghetti tubing to use where necessary.
This kit will include the following:
(2) .01uf safety capacitors (C1, C2)
(2) .1uf (630V) capacitors (C8 & C9)
(1) .047uf (630V) capacitor (C10)
(1) .022uf (630V) capacitor (C11)
(1) .01uf (630V) capacitors (C13)
(1) Wired BNC panel mount connector (J1)
1 foot of spaghetti tubing
If you don’t feel that you are technically inclined to install this kit please find a qualified technician to install this for you. I will not be held responsible for any damage caused by your installation.
The Eico 324 manual/schematic can be readily found on the Internet.
There are no returns on this item!
PayPal Payment is the only method of payment allowed.
FREE SHIPPING! I will carefully pack this kit so that it arrives safely. Local pickup is available and free.
The free shipping offer is valid anywhere in the lower 48 only. For Alaska and Hawaii please contact me for a shipping quote. No international shipping!
Please review my auctions for other Eico 324 kits that I sell.
Thank you for viewing my auction!
Buy it Now for .99!