ADF4351-VFO Digital LCD Display RF Signal Source Signal Generator 35MHz-4000MHz

Description

Home
Payment
Shipping
About us
Contact us
Store Categories
Store Categories
Other
Details
Features:
Simple RF signal source signal generator.
Core components: avr mega8 microcontroller, cost-effective single-chip microcomputer, is the low-end general-purpose m16 version, the peripheral adc has a 2.56 v regulator supply, this is not available on other mid-range microcontrollers .
Adf4351, the traditional vco + pll + 6 series high speed bistable circuit (except 2 circuits, trigger d).
35-2200 mhz is obtained by frequency division. After being shaped, the amplitude of the fundamental wave does not change much. This is for high frequency.
(After the signal is split, it must be a rectangular wave, and the amplitude becomes the trigger level).
This product uses the single chip microcomputer as the core, which greatly simplifies the design, reduces development time, saves cost and is simple, reliable and practical.
Provide a signal source for the ac path of the device under test, analyze the frequency amplitude characteristics of the ac path and pay attention to the impedance of the device under test.
Specifications:
Main material: PCB
Green color
Supply voltage: dc 4.5 v-5.5 v, please note that this machine has no built-in voltage regulator unit, it should not supply over the voltage range
Standby current: <25ma
Emission current: <150ma
Output impedance: 50 ohms
Output frequency range: 35 mhz-4000 mhz
Output step: 1 khz-8 khz
Output power: -1dbm (w) @ 150 mhz (absolute value of test power) approx. 1 mW
Item size: 80 * 75 * 30mm / 3.1 * 3.0 * 1.2in
Item weight: 85g / 3.0 oz
Package size: 118 * 97 * 35mm / 4.6 * 3.8 * 1.4in
Package weight: 108g / 3.8 oz
note:
This product operation keyboard has 15 ppt keys, 0 keys, 9 numeric keys, 10, "+ +" and "-" keys that adjust the frequency to use, and also generate emission output behavior.
Press the "+ +" or "-" key to add 1 kHz or lose 1 kHz for the primitive frequency output. Press and hold "+ +" or "-" for more than 1 second, continuous or continuous reduction will occur.
The scanning mode is 1 khz at 35 mhz ~ 138 mhz; 10 khz at 138 mhz ~ 550 mhz; 100 khz at 550 mhz ~ 4000 mhz.
To end the scan, simply press the "+ +" - "button or the" ok "button. The" ok "button is the exit control button. Click to launch and press again to stop the transmission.
The launch behavior caused by "+ +" or "-" requires two "ok" s to end the launch behavior. This product is in the upper right corner of the screen when there is output emission behavior.
The corner will appear ">>", button "c" will end the broadcast and the frequency will be zero.
Package List:
1 * Signal generator
Shipping Policy
Payment Method
Returns Policy
Shipping Policy
We only accept your
Ebay Address
,Please Make sure it's 100% right.
The items you ordered will be shipped out in 1 business day by Hong Kong Air Mail when your payment is clear. The arrival time is 5-20 business days to United States usually.
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutralor negative feedback, so that we can satisfactorily address your concerns.
Payment Method
Returns Policy
copyright © 2018 datacaciques
Home
Payment
Shipping
About us
Contact us
Home
Payment
Shipping
About us
Contact us
Details
Features:
Simple RF signal source signal generator.
Core components: avr mega8 microcontroller, cost-effective single-chip microcomputer, is the low-end general-purpose m16 version, the peripheral adc has a 2.56 v regulator supply, this is not available on other mid-range microcontrollers .
Adf4351, the traditional vco + pll + 6 series high speed bistable circuit (except 2 circuits, trigger d).
35-2200 mhz is obtained by frequency division. After being shaped, the amplitude of the fundamental wave does not change much. This is for high frequency.
(After the signal is split, it must be a rectangular wave, and the amplitude becomes the trigger level).
This product uses the single chip microcomputer as the core, which greatly simplifies the design, reduces development time, saves cost and is simple, reliable and practical.
Provide a signal source for the ac path of the device under test, analyze the frequency amplitude characteristics of the ac path and pay attention to the impedance of the device under test.
Specifications:
Main material: PCB
Green color
Supply voltage: dc 4.5 v-5.5 v, please note that this machine has no built-in voltage regulator unit, it should not supply over the voltage range
Standby current: <25ma
Emission current: <150ma
Output impedance: 50 ohms
Output frequency range: 35 mhz-4000 mhz
Output step: 1 khz-8 khz
Output power: -1dbm (w) @ 150 mhz (absolute value of test power) approx. 1 mW
Item size: 80 * 75 * 30mm / 3.1 * 3.0 * 1.2in
Item weight: 85g / 3.0 oz
Package size: 118 * 97 * 35mm / 4.6 * 3.8 * 1.4in
Package weight: 108g / 3.8 oz
note:
This product operation keyboard has 15 ppt keys, 0 keys, 9 numeric keys, 10, "+ +" and "-" keys that adjust the frequency to use, and also generate emission output behavior.
Press the "+ +" or "-" key to add 1 kHz or lose 1 kHz for the primitive frequency output. Press and hold "+ +" or "-" for more than 1 second, continuous or continuous reduction will occur.
The scanning mode is 1 khz at 35 mhz ~ 138 mhz; 10 khz at 138 mhz ~ 550 mhz; 100 khz at 550 mhz ~ 4000 mhz.
To end the scan, simply press the "+ +" - "button or the" ok "button. The" ok "button is the exit control button. Click to launch and press again to stop the transmission.
The launch behavior caused by "+ +" or "-" requires two "ok" s to end the launch behavior. This product is in the upper right corner of the screen when there is output emission behavior.
The corner will appear ">>", button "c" will end the broadcast and the frequency will be zero.
Package List:
1 * Signal generator
Shipping Policy
Payment Method
Returns Policy
Shipping Policy
We only accept your
Ebay Address
,Please Make sure it's 100% right.
The items you ordered will be shipped out in 1 business day by Hong Kong Air Mail when your payment is clear. The arrival time is 5-20 business days to United States usually.
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutralor negative feedback, so that we can satisfactorily address your concerns.
Payment Method
We accept Paypal ONLY. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
Returns Policy
We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.
Please include your eBay ID and item number with any email requests.