ADF4351 Signal Source Generator VFO Variable-Frequency Oscillator 35mhz-4000mhz

Description

Product Overview
ADF4351 Signal Source Generator VFO Variable-Frequency Oscillator 35mhz-4000mhz
Features:
Simple RF signal source signal generator.
Core components: avr mega8 microcontroller, cost-effective single-chip microcomputer, is the low-end general-purpose m16 version, the peripheral adc has a 2.56 v regulator supply, this is not available on other mid-range microcontrollers .
Adf4351, the traditional vco + pll + 6 series high speed bistable circuit (except 2 circuits, trigger d).
35-2200 mhz is obtained by frequency division. After being shaped, the amplitude of the fundamental wave does not change much. This is for high frequency.
(After the signal is split, it must be a rectangular wave, and the amplitude becomes the trigger level).
This product uses the single chip microcomputer as the core, which greatly simplifies the design, reduces development time, saves cost and is simple, reliable and practical.
Provide a signal source for the ac path of the device under test, analyze the frequency amplitude characteristics of the ac path and pay attention to the impedance of the device under test.
Specifications:
Main material: PCB
Green color
Supply voltage: dc 4.5 v-5.5 v, please note that this machine has no built-in voltage regulator unit, it should not supply over the voltage range
Standby current: <25ma
Emission current: <150ma
Output impedance: 50 ohms
Output frequency range: 35 mhz-4000 mhz
Output step: 1 khz-8 khz
Output power: -1dbm (w) @ 150 mhz (absolute value of test power) approx. 1 mW
Item size: 80 * 75 * 30mm / 3.1 * 3.0 * 1.2in
Item weight: 85g / 3.0 oz
Package size: 118 * 97 * 35mm / 4.6 * 3.8 * 1.4in
Package weight: 108g / 3.8 oz
note:
This product operation keyboard has 15 ppt keys, 0 keys, 9 numeric keys, 10, "+ +" and "-" keys that adjust the frequency to use, and also generate emission output behavior.
Press the "+ +" or "-" key to add 1 kHz or lose 1 kHz for the primitive frequency output. Press and hold "+ +" or "-" for more than 1 second, continuous or continuous reduction will occur.
The scanning mode is 1 khz at 35 mhz ~ 138 mhz; 10 khz at 138 mhz ~ 550 mhz; 100 khz at 550 mhz ~ 4000 mhz.
To end the scan, simply press the "+ +" - "button or the" ok "button. The" ok "button is the exit control button. Click to launch and press again to stop the transmission.
The launch behavior caused by "+ +" or "-" requires two "ok" s to end the launch behavior. This product is in the upper right corner of the screen when there is output emission behavior.
The corner will appear ">>", button "c" will end the broadcast and the frequency will be zero.
Package List:
1 * Signal generator
Shipping Policy
Item Location
Payment Mathord
Returns Policy
About Feedback
Shipping Policy
1. We Ship to Worldwide
2. We ship your orders within 1-2 business days after the payment cleared.
3. Item shipped from China via china Post Airmail, reach most of the countries within 2 to 4 weeks.
4. Delivery time depends on destination and other factors, it may takes up to 20 days. If you don't receive
the item after 25 days,please keep in touch with us, we'll investigate and solve the delivery problem.
5. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges
are the buyer's responsibility. Please check with your country's customs office to determine what these
additional costs will be prior to bidding or buying.
Item Location
ShenZhen
Payment Mathord
1. We accept PAYPAL only.
2. Payment must be made within 7 days of auction closing (Unpaid dispute will automatically open when item
is not paid in 7 days).
3. PLEASE NOTE: SHIPPING&HANDING DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
4. Please list your special requests (color, packages, value of declaration, etc.) in the EBAY NOTES SECTION
when you make payment
Returns Policy
1. Customer satisfaction is our top goal. All products are quality checked. They are new and in good
condition when shipped to our customers. If product is defective or damage upon arrival, or wrong
product shipped, please keep in touch with us immediately. Returns accepted within 14 days of delivery date
and item must be in original new condition, not worn or altered in any way with attached tags & wrap.
Otherwise deal is final. Return shipping must be paid by buyer.
2. Please keep in touch with us first if you have anyproblems/questions/concerns. We will be happy to resolve
any issues you may have in a cordial and friendly manner.
3. We appreciate your Positive Feedback, and will do the same in return. PLEASE DO NOT leave
negative feedback without first communication with us. Please allow max 24 HOURS for us to respond
About Feedback
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is
very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or
negative feedback, so that we can satisfactorily address your concerns.It is impossible to address
issues if we do not know about them!