16 Ch 12 Bit PWM LED Servo Driver I2C PCA9685 Arduino Flux Workshop

Description

Highlights
Brands
16 Ch 12 Bit PWM LED Servo Driver
Features
Flux SKU:
IBAA100018
Length (mm):
62
Width (mm):
25
Height (mm):
3
Solder Level:
Through-hole
Brand:
Unbranded/Generic
Main Colour:
Purple
Country of Manufacture:
China
MPN:
IBAA100018
UPC:
Does Not Apply
Minimum Operating Temperature:
-40°C
Maximum Operating Temperature:
85°C
Number of Items:
1
Parts list:
1 16 Channel PWM module
Pin Pitch:
2.54mm
Pin Arrangements:
(PWM, V+, GND)
Soldering Points:
Pass-through communication
I2C Address select
Drive Current:
2 - 10A Servo
Mounting Hole Size:
M3
Mounting Dimensions:
56/20mm
Format:
I2C
Address:
0x60 - 0x80
Chipset MPN:
PCA9685
Ouput Channels:
16
Output Type:
PWM
Output Maximum Frequency:
1.6KHz
Description
This module is ideally suited to adding PWM control to your project, whether it be driving an LED array or an array of servo motors, this module will drive arrays for days. Based on the PCA9685 chipset which features its own internal clock the module allows for the control of 16 seperate PWM channels through a 2 - wire connection.
The module requires an external power supply of 5V to be able to drive the connected devices. The logic of the board itself is powered through the host microcontroller. Communication is handled through a 2 pin I2C interface, available on a wide range of microcontrollers. The I2C address of the module is in the range of 0x60 - 0x80 depending on the configuration of the onboard address select pins.
Although not needed in most situations a soldering point for a brown out capacitor is included. It will only be needed if you were to use a supply that dipped a lot when the servos moved. The capacitance value is determined by the setup in use. A recommendation of n * 100uF for n = number of servos is a good starting point.
If you require any assistance in the construction or use of the kit please do not hesitate to contact us.
Pin
Description
GND
0V
OE
Output enable
SCL
I2C Clock
SDA
I2C Data
VCC
5V Input
V+
Screw terminal voltage
Images
Our main postal service is the Royal Mail 24. We aim to post same day when orders are received before 15:00 GMT. Orders received after this time will be posted the next business day.
Returns
We accept returns of unwanted, damaged or faulty items within 30 days of purchase.
If you receive a damaged item please message us directly through the eBay messaging system; attach pictures if possible. This will enable us to process the return as fast as possible.
Be aware, if an item is "unwanted", return postage will be paid by the consumer. Furthermore, if a returned "faulty" item is found to not be faulty, postage costs will not be refunded. We are unable to refund the cost of a courier and will only be able to refund return postage on receiving a copy of the postage receipt.
Please ensure when returning an item, adequate packaging is used as we will be unable to process the refund if the items are damaged in the post.
Company
Flux Workshop began trading late 2014, drawing from years of experience and interest in electronics and building CNC machines. With the aim to supply good quality components at reasonable prices that allow you, the customer, to have the confidence to embark on your project.
We are here to help you in any way we can. If you need to make sure a product is right for your needs or how to get the most from a product, please do not hesitate to contact us through the eBay messaging service (response usually within 24 hours).
This module is ideally suited to adding PWM control to your project, whether it be driving an LED array or an array of servo motors, this module will drive arrays for days. Based on the PCA9685 chipset which features its own internal clock the module allows for the control of 16 seperate PWM channels through a 2 - wire connection. The module requires an external power supply of 5V to be able to drive the connected devices. The logic of the board itself is powered through the host microcontroller. Communication is handled through a 2 pin I2C interface, available on a wide range of microcontrollers. The I2C address of the module is in the range of 0x60 - 0x80 depending on the configuration of the onboard address select pins. Although not needed in most situations a soldering point for a brow